For manual welding

Welding positioners type PP

Bearing capacity 800kg – 10t

A compact three-axis positioner without anchoring requirement for simpler applications. Hydraulic lift and clamping table tilt is employed for positioning of the table in manual mode. Even the basic configuration positioner features stepless adjustment of table rotation speed in its entire range and is equipped with a START-STOP system. Various optional features of the control system further expand the control capabilities of the positioner.

Compact design
No anchoring required
Hydraulic lifting and tilting of the table
Stepless table speed control with START-STOP
Optional remote control
Optional foot switch for START-STOP
Optional customization of the clamping table to customer specification

Send inquiry

Technical specifications

Swipe right for full view

mm inch

Type	PP 8	PP 15	PP 30	PP 50	PP 100
Bearing Capacity (kg)	800	1,500	3,000	5,000	10,000
Table Tilting Moment (Nm)	1,700	3,000	10,000	15,000	30,000
Table Torque (Nm)	750	2,600	5,300	7,400	17,200
Table Tilting Speed (°/min)	123	215	190	175	155
Table Rotation Speed (rpm)	0.1 – 1.7	0.1 – 1.5	0.1 – 1.4	0.04 – 0.6	0.06 – 0.9
Lifting Speed (m/min)	1.2	1.7	1.1	1.1	1.0
Table Tilting Angle (°)	100	100	100	95	95
A (mm)	1,700	1,750	2,120	2,550	3,100
B (mm)	700	850	1,000	1,230	1,500
C (mm)	725	775	980	1,220	1,200
D (mm)	700	800	850	1,000	1,250
P (mm)	1,200	1,260	1,497	1,680	2,000
Z (mm)	625	660	695	800	1,050
Hmin (mm)	725	775	980	1,100	1,200
Weight (kg)	654	1,020	1,600	3,050	6,250

Type	PP 8	PP 15	PP 30	PP 50	PP 100
Bearing Capacity (lb)	1,764	3,307	6,614	11,023	22,046
Table Tilting Moment (lb-ft)	1,254	2,213	7,376	11,063	22,127
Table Torque (lb-ft)	553	1,918	3,909	5,458	12,686
Table Tilting Speed (°/min)	123	215	190	175	155
Table Rotation Speed (rpm)	0.1 – 1.7	0.1 – 1.5	0.1 – 1.4	0.04 – 0.6	0.06 – 0.9
Lifting Speed (ft/min)	3.9	5.6	3.6	3.6	3.3
Table Tilting Angle (rad)	1.75	1.75	1.75	1.66	1.66
A (in)	66.9	68.9	83.5	100.4	122.0
B (in)	27.6	33.5	39.4	48.4	59.1
C (in)	28.5	30.5	38.6	48.0	47.2
D (in)	27.6	31.5	33.5	39.4	49.2
P (in)	47.2	49.6	58.9	66.1	78.7
Z (in)	24.6	26.0	27.4	31.5	41.3
Hmin (in)	28.5	30.5	38.6	43.3	47.2
Weight (lb)	1,442	2,249	3,527	6,724	13,779

Product photo gallery

Similar devices

See all

Welding positioners type SP

A three-axis positioner without the need for anchoring allows independent position adjustments in three axes.

Show

Welding positioners type SPK

A fully covered three-axis positioner allows independent position adjustments in three axes.

Show

For manual welding